BLDKJ - CURETHANE 100 TOP COAT RESIN, 11CU101TC RES
- MSDS: BLDKJ
- Manufacturer: DBA PRODUCTS CO INC
- Product Name: CURETHANE 100 TOP COAT RESIN, 11CU101TC RES
- National Stock Number: 8040-00N018404
Product Identification
Product ID:CURETHANE 100 TOP COAT RESIN, 11CU101TC RES
MSDS Date:07/03/1990
FSC:8040
NIIN:00N018404
MSDS Number: BLDKJ
Responsible Party
LAKE BLUFF, IL 60044-1711
US
Emergency Phone: 708-234-8100
Info Phone: 708-234-8100
Cage: 60443
Contractor
Telephone: (708) 234-8100
Cage: 60443
Ingredients
NON-HAZARDOUS INGREDIENTS.
Hazards
LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:NO Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:INGEST/INHAL/EYE/DERMAL: UNKNOWN.
REPEATED OVEREXPOSURE: NONE CURRENTLY KNOWN.
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.
First Aid
First Aid:INGEST: DRINK WATER. INHAL: REMOVE TO FRESH AIR. EYE: FLSUH
EYE WITH LARGE AMOUNT OF WATER, FOR AT LEAST 15 MIN RAISING UPPER
AND LOWER LID OCCASIONALLY. IF IRRITATION PERSISTS CONSULT PHYS.
DERMAL: W ASH AFFECTED AREA THOROUGHLY WITH SOAP AND WATER.
Fire Fighting
Flash Point Method:SCC
Flash Point:205F,96C
Extinguishing Media:USE WATER FOG, FOAM, DRY CHEMICAL, OR CARBON
DIOXIDE.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA AND FULL
PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:NONE KNOWN.
Accidental Release
Spill Release Procedures:CONTAIN SPILL TO SMALL AREA. USE INERT
ABSORBENT(SAND, EARTH, SAWDUST, OR VERMICULITE) TO CLEAN UP. USE
NON- SPARKING TOOLS. PLACE IN SUITABLE CONTAINER FOR RECOVERY OR
DISPOSAL.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:DO NOT STORE ABOVE 120 DEGREES F OR
BELOW 60 DEGREES F. DO NOT FLAME CUT, WELD, BRAZE CONTAINERS.
Other Precautions:CONTAINERS SHOULD BE WASHED AND USED FOR ANY OTHER
PURPOSE. DO NOT TAKE INTERNALLY.
Exposure Controls
Respiratory Protection:NONE LIKELY TO BE NEEDED. USE NIOSH/MSHSA
APPROVED RESPIRATOR APPROPRIATE FOR EXPOSURE OF CONCERN .
Ventilation:MECHANICAL(GENERAL): PREFERRED.
Protective Gloves:IMPERMEABLE GLOVES.
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:SAFETY GOGGLES.
Work Hygienic Practices:USE SUGGESTED PROT EQUIP. WASH THOROUGHLY WITH
SOAP AND WATER BEFORE EACH BREAK PERIOD AND AT END OF SHIFT.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.
Chemical Properties
HCC:N1
Vapor Density:>1
Spec Gravity:<1
Evaporation Rate & Reference:>1(ETHER=1)
Appearance and Odor:LIQUID.
Stability
Stability Indicator/Materials to Avoid:YES
NONE KNOWN.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:BURNING OR INTENSIVE HEAT WILL PRODUCE
CARBON MONOXIDE, AND OXIDE OF NITROGEN.
Disposal
Waste Disposal Methods:DISPOSE IN ACCORDANCE WITH FEDERAL, STATE, AND
LOCAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.